Well Pump Replacement Tips
The need for well pump replacement is but one of the numerous plumbing problems homeowners often face, more so during the harsh winter months. And unlike other recurring issues, like pipe freezing, this is not something an amateur should attempt to fix, as it can be somewhat complicated, in addition to demanding and potentially damaging to the structure. However, people that have some plumbing experience and knowledge, will be happy to read that while sensitive, replacing a well pump is not completely impossible. To go about it, you need some knowledge of how these machines work, plus, Price Well Drilling Inc basic tips on how to ensure success.
Knowing the basics
First and foremost, you need to identify what equipment needs to be replaced. For example, shallow wells usually use a jet pump, this can be seen above ground, and wells that are over 25 feet in depth will use a submersible one, which will be entirely under water. It is important also to determine the power ratings and gallons-per-minute ratio, in addition to the size of your well.
Once you have acquired all the new, the person that will be fixing the problem, which ideally would be a professional, needs to trip the circuit breaker on the faulty pump, in order to make it stop working. Then, extend a garden hose from the pump to the outside, so you can drain the water from the system. Its part is very important and needs to be done before the well pump replacement occurs, to prevent any damage to the new equipment.
Knowing the equipment
From then on, the process will depend heavily on the kind of equipment being replaced. For instance, with a jet pump, it is sufficient to unscrew the ports, unplug all the wires, then replace the pump, after which it will need to be sealed with Teflon piping tape.
To find out about our well pump replacement services in Hickory, NC, call us today at (828) 214-7264.
